HIGH-EFFICIENCY LAMPS AND LIGHT FITTINGS
Discover the lighting that best fits your business
DURABILITY AND HIGH PERFORMANCE IN LIGHTING
LED stands for light-emitting diode. The term LED is accepted internationally.
They are used in both the residential and industrial and tertiary sectors, in the interior of buildings, for ornamental lighting or in street lighting.
They enable the most appropriate shade to be chosen for each application, although as the colour temperature drops (warmer shades), the price increases and energy efficiency is reduced compared to white light.
- High lighting efficiency (lm/W).
- Very long life (between 25,000 and 50,000 hours).
- They switch on instantly.
- Easy to place (there are no limitations as to the lamp's position).
Iberdrola offers you the possibility of analysing your specific needs and proposing the most suitable solution for street lighting, business premises lighting or the interior of buildings.
DISCOVER THE MAIN FEATURES OF METAL HALIDE LAMPS
Metal halide lamps create high-quality atmospheres as they combine a good colour rendering capacity with the possibility of selecting the most appropriate colour temperature. For this reason they are selected in applications where these aspects are critical, such as places where television broadcasts will take place, shop windows in main thoroughfares or shops displaying quality products, squares and avenues in large cities, industries which require good colour rendering, etc.
They are available in a full power range from 35 to 2,000 W.
Their operation requires auxiliary equipment for switching on and stabilising the discharge. Around 10 minutes must elapse from the moment they are switched on for these lamps to reach the nominal conditions in terms of intensity, luminosity, shade, etc.; if the supply is switched off, hot restart requires at least 15 minutes.
These lamps project very focused light and can therefore cause glare. To prevent this, they are almost always housed in projectors to reduce luminance.
Iberdrola offers its customers the possibility of analysing their specific needs and proposing the most suitable solution for street lighting, business premises lighting or buildings (indoors or outdoors).
WE PRESENT OUR HIGH-EFFICIENCY FLUORESCENCE SOLUTION
The use of fluorescent lamps is widespread in all sectors. Despite the fact that they have been around for many years, this is one of the types of lamps that has evolved the most since its launch. The lighting efficiency, shade, colour rendering, size, design, etc. have all been improved.
Today, the solutions based on the use of fluorescent lamps for indoor lighting provide the best performance in spaces with heights up to 5-6 metres, as long as décor requirements allow for this.
The following fluorescent lamps are considered to be high-efficiency:
- 16 mm in diameter, both linear and folded (the smaller the diameter, the higher the efficiency).
- Those which reduce the power while maintaining the dimensions ("Eco"). The resulting energy saving amounts to 10-15% by simply replacing the tubes.
- Compact lamps with electronic ballast, for direct replacement of incandescent bulbs.
Together with the evolution of the lamps, high-frequency electronic ballasts have enabled the system's energy usage to be reduced considerably, while facilitating the application of flexible regulation and control systems. Light fitting designs have also been achieved that meet the most demanding expectations in terms of energy efficiency, visual comfort and aesthetics.
Iberdrola offers you the possibility of analysing your specific needs and proposing the most appropriate lighting solution for your premises.